Loading...
HomeMy WebLinkAboutDiesel Project Purchases 1988December 7, 1988 88-M-363 MEMUKANUUM TO: foyd M. Hodson, General Manager FROM: SUBJECT: Mark E. Teitzel, Manager, Engineering New Diesel Electric Sets/Diesel Engines Only/Generators Only Proposed for Purchase Under the 1989-1990 Two Year Construction Work Plan The following units are proposed for purchase under the new Two Year Construction Work P1 Ambler W.0. 60G14 Anvik W.O. 51G19 Chevak W.0. 14625 Eek W.0. 18G11 Hooper W.0. 8632 Bay Koyuk W.0. 40G22 Noatak W.0. 42626 Savoonga W.0. 29G11 Toksook W.0. 71G26 Bay Wales W.0. 62620 Summar, One Cummins KTA 38 1 One Caterpillar 3412 Three Cummins KTA 11 an: Install Cummins KTA 1150 Generator Set $ 85,000 Install Cummins LTA10 1200 RPM 1 Generator Set $ 65,000 Install Caterpillar 3412 1200 RPM Engine 2 Only or Equivalent $100,000 Install Larger Generator on AC 3500 #2 $ 15,000° Install 400 KW (Cummins KTA 38) Generator Set $125,000 Install Larger Generator on LTA 10 #1 $ 15,0007 Install Cummins KTA 1150 Generator Set $ 85,000 Install Larger Generator on AC 6851 #3 $ 15,0004 Install] Cummins KTA 1150 Generator Set $ 85,000 Install Cummins LTA 10 1200 RPM Generator 1 Set $ 65,000 200 RPM Generator Set (850 H.P.) 1200 RPM Engine Only (530 H.P.)@ 50 1200 RPM Generator Sets (410 H.P.) > Two C Two 2 One 1 Notes 1. ummins LTA 10 1200 RPM Generator Sets (184 H.P. Approx.)+ 68 KW Three Phase Rated 1800 RPM Generators* 35 KW Three Phase Rated 1800 RPM Generator® t ' 1200 RPM generators only may be available from retired 1200 RPM 8V-71 generator sets and may not have to be purchased as part of the set. Original 1200 RPM KATO Generators: Wales KATO 105SU9D $.N. 67931-3 (Used for Old Harbor) New Stuyahok KATO 105SU9D S.N. 67931-2 (Used at Wales) New Stuyahok KATO 105SU9D S.N. 67931-1 (In Yard, Proposed for Shageluk) Kaltag KATO 105SU9D =-S.N. 67931-4 (Still in Service) Kaltag KATO 105SU9D S.N. 69563-1 (Retired in Village) Shungnak KATO 105SU9D S.N. 69563-3 (Still in Service) Scammon Bay KATO 105SU9D S.N. 67931-5 (Still in Service) The retired unit at Kaltag should be brought back to Anchorage, tested and put into stock as a backup unit. Currently there is one Caterpillar 3412 1200 RPM Engine Only in stock. It is the unit that was removed from Hooper Bay and repaired following discovery of the block corrosion problem. If this unit is used at Chevak, a spare unit is still needed to back up the existing 3412 at Emmonak, Hooper Bay, Mt. Village, Noorvik, Nunapitchuk, Selawik, and Togiak. This generator may not have to be purchased. An acceptable unit will become available when a larger generator is installed at Koyuk. One 268 KW 1800 RPM Generator may not be needed as it has been recommended that the AC 685I engine at Savoonga be relocated to a village where an existing AC 6851 is due for an overhaul. One 268 KW 1800 RPM Generator became available following the decision to convert the Old Harbor module unit to 1200 RPM. It is still recommended that a spare 268 KW three phase 1800 RPM generator be kept in stock as a backup unit for Ambler, Elim, Goodnews Bay, Grayling, Holy Cross, Huslia, Kaltag, Kivalina, Koyuk, Marshall, Mekoryuk, Minto, New Stuyahok, Noatak, Old Harbor, Pilot Station, Quinhagak, Russian Mission, Scammon Bay, Shaktoolik, Shungnak, St. Michael, Stebbins, Toksook Bay, and Tununak. We currently do not have a spare KTA 1150 engine in stock to back up the existing KTA 1150s at Alakanuk, Gambell, Nulato, Pilot Station, Quinhagak, Savoonga, Shishmaref, and the future units at Ambler, Noatak, and Toksook Bay. Final Summary Recommended for Purchase One Cummins KTA 38 1200 RPM Generator Set (850 H.P.) One Caterpillar 3412 1200 RPM Engine Only (530 H.P.) Three Cummins KTA 1150 1200 RPM Generator Sets (410 H.P.) One Cummins KTA 115051200 RPM Engine Only (410 H.P.) for a Spare Two Cummins LTA 10 1200 RPM Generator Sets (184 H.P. Approx.) One Cummins LTA 10 1800 RPM Engine Only (276 H.P.) for a spare with separate turbocharger for 1200 RPM use and with separate fuel pump calibrated for 1200 RPM use. |) Led ¢ If ark E. Teitze Manager, Engineering