Loading...
HomeMy WebLinkAboutQ_CELLS_Data_sheet_Q.PEAK_DUO_XL-G10.3_475-495_2021-08_Rev02_NA (1)BREAKING THE 21 % EFFICIENCY BARRIER Q.ANTUM DUO Z Technology with zero gap cell layout boosts module efficiency up to 21.6 %. LOW ELECTRICITY GENERATION COSTS Higher yield per surface area, lower BOS costs and up to 80 watts more module power than standard 144 half-cell modules. ENDURING HIGH PERFORMANCE Long-term yield security with Anti LID Technology, Anti PID Technology1, Hot-Spot Protect and Traceable Quality Tra.Q™. EXTREME WEATHER RATING High-tech aluminum alloy frame, certified for high snow (5400 Pa) and wind loads (3000 Pa). A RELIABLE INVESTMENT Inclusive 12-year product warranty and 25-year linear performance warranty2. STATE OF THE ART MODULE TECHNOLOGY Q.ANTUM DUO combines cutting edge cell separation and innovative 12-busbar design with Q.ANTUM Technology. 1 APT test conditions according to IEC / TS 62804-1:2015, method A (−1500 V, 96 h) 2 See data sheet on rear for further information. THE IDEAL SOLUTION FOR: Ground-mounted solar power plants Q.PEAK DUO XL-G10.3 475-495 ENDURING HIGH PERFORMANCE α [% / K]+0.04 β [% / K]−0.27 γ [% / K]−0.34 NMOT [°F]109 ± 5.4 (43 ± 3 °C) Hanwha Q CELLS America Inc. 400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL +1 949 748 59 96 | EMAIL inquiry@us.q-cells.com | WEB www.q-cells.us [V]1500 (IEC) / 1500 (UL)Class II [A DC]20 TYPE 1 [lbs/ft2]75 (3600 Pa) / 42 (2000 Pa) −40 °F up to +185 °F (−40 °C up to +85 °C)[lbs/ft2]113 (5400 Pa) / 63 (3000 Pa) 3 See Installation Manual 475 480 485 490 495 [W]475 480 485 490 495 [A]11.24 11.26 11.29 11.31 11.34 [V]53.58 53.61 53.64 53.68 53.71 [A]10.66 10.71 10.76 10.81 10.86 [V]44.54 44.81 45.07 45.33 45.59 [%]≥ 20.5 ≥ 20.7 ≥ 20.9 ≥ 21.2 ≥ 21.4 [W]356.4 360.1 363.9 367.6 371.4 [A]9.05 9.07 9.09 9.12 9.14 [V]50.53 50.56 50.59 50.62 50.65 [A]8.39 8.43 8.47 8.52 8.56 [V]42.49 42.72 42.94 43.17 43.39 89.4 in 2270 mm 43.3 in 1100 mm 47.6 in 1210 mm 1779 lbs 807 kg 22 20 29 53' 40' HC Certified UL 61730 MECHANICAL SPECIFICATION Format 87.2 in × 41.1 in × 1.38 in (including frame) (2216 mm × 1045 mm × 35 mm) Weight 57.3 lbs (26.0 kg) Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with anti-reflection technology Back Cover Composite film Frame Anodized aluminum Cell 6 × 26 monocrystalline Q.ANTUM solar half cells Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in (53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes Cable 4 mm² Solar cable; (+) ≥ 27.6 in (700 mm), (−) ≥ 13.8 in (350 mm)* Connector Stäubli MC4, Stäubli MC4-Evo2, Hanwha Q CELLS HQC4, IP68 *Long cables (+) ≥ 57.1 in (1450 mm), (−) ≥ 57.1 in (1450 mm) for landscape installation are available upon request. Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use of this product. Specifications subject to technical changes © Q CELLS Q.PEAK DUO XL-G10.3_475-495_2021-08_Rev02_NAELECTRICAL CHARACTERISTICS POWER CLASS MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC1 (POWER TOLERANCE +5 W / −0 W)MinimumPower at MPP1 PMPP Short Circuit Current1 ISC Open Circuit Voltage1 VOC Current at MPP I MPP Voltage at MPP VMPP Efficiency1 η MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT2 MinimumPower at MPP PMPP Short Circuit Current ISC Open Circuit Voltage VOC Current at MPP I MPP Voltage at MPP VMPP 1Measurement tolerances PMPP ± 3 %; I SC; VOC ± 5 % at STC: 1000 W/m2, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 • 2 800 W/m², NMOT, spectrum AM 1.5 Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE At least 98 % of nominal power during first year. Thereafter max. 0.5 % degradation per year. At least 93.5 % of nominal power up to 10 years. At least 86 % of nominal power up to 25 years. All data within measurement toleranc- es. Full warranties in accordance with the warranty terms of the Q CELLS sales organisation of your respective country. Typical module performance under low irradiance conditions in comparison to STC conditions (25 °C, 1000 W/m²) TEMPERATURE COEFFICIENTS Temperature Coefficient of ISC Temperature Coefficient of VOC Temperature Coefficient of PMPP Nominal Module Operating Temperature PROPERTIES FOR SYSTEM DESIGN Maximum System Voltage VSYS PV module classification Maximum Series Fuse Rating Fire Rating based on ANSI / UL 61730 Max. Design Load, Push / Pull3 Permitted Module Temperature on Continuous DutyMax. Test Load, Push / Pull3 41.1" (1045 mm) 51.5" (1308 mm) 87.2" (2216 mm) 1.38" (35 mm) 4 × Mounting slots (DETAIL A)8 × Drainage holes 0.12 × 0.24" (3 × 6 mm) Frame 39.5" (1003 mm) NA 17.9" (454 mm) Label 4 × Grounding holes, Ø 0.18" (4.5 mm)4 × Drainage holes 15.7" (400 mm) 4 × Mounting slots system Tracker (DETAIL B) DETAIL A 0.63" (16 mm) 0.33" (8.5 mm)0.83" (21 mm) DETAIL B 0.39" (10 mm) 0.28" (7 mm)0.87" (22 mm) 39.4" (1001 mm) 31.1" (790 mm) 13.8" (350 mm) 27.6" (700 mm) EN RELATIVE EFFICIENCYCOMPARED TO NOMINAL POWER [%]YEARS Q CELLS Industry standard for linear warranties* *Standard terms of guarantee for the 10 PV companies with the highest production capacity in 2014 (as at: September 2014) 100 95 90 85 80 155 2520010 98 86 200 400 600 800 1000 110 100 90 80RELATIVE EFFICIENCY [%]IRRADIANCE [W/m²] Drawing not to scale QUALIFICATIONS AND CERTIFICATES PACKAGING INFORMATION UL 61730, CE-compliant, IEC 61215:2016, IEC 61730:2016, U.S. Patent No. 9,893,215 (solar cells); Certification in process. Horizontal packaging pallets pallets modules